How Thick Should Your Barndominium Slab Be? (2024)

How Thick Should a Barndominium Concrete Slab Be?

How Thick Should Your Barndominium Slab Be? (2)

Barndominiums have been growing rapidly in popularity for their spacious, flexible and affordable homebuilding potential. But transforming an old barn or shed into a livable residence requires some structural adaptations – starting with an adequately thickened concrete slab foundation.

How Thick Should Your Barndominium Slab Be? (3)

Typical pole barns or steel sheds build upon dirt, gravel or very thin concrete pads just meant to keep the framing lifted off the ground. Converting these structures to barndominiums demands adding a reinforced slab to withstand occupant loading and anchor the walls. This raises the question – what slab thickness meets structural requirements without overbuilding?

How Thick Should Your Barndominium Slab Be? (4)

General Guidelines

For barndominiums up to 1,500 sq. ft., most recommendations fall between a 4” and 6″ thick slab. This accommodates moderate traffic and furnishings adequately without excessive concrete use. The steel perimeter beams of barndominium kits require less internal slab support than wood framing.

Larger or two-story barndominiums may benefit from 6” to 8” thicknesses to prevent cracking or sinking from heavier live/dead loads. Farmhouses styled for heavy equipment will also need reinforced 8″ slab sections. Maximum steel-framed barndominium size per IRC code reaches 5,000 sq. ft. before requiring special engineering.

How Thick Should Your Barndominium Slab Be? (5)

Other Slab Spec Factors

Beyond depth, proper steel reinforcement and drainage provisions also play key roles in achieving structural slab integrity:

– #4 rebar grid 12” on center each way
– 4”-6” compacted gravel base
– 6 mil polyethylene vapor barrier
– Wire mesh for added tensile strength

How Thick Should Your Barndominium Slab Be? (6)

Perimeter edge thickening further helps minimize cracking and separate slabs from exterior grade. Using an elevated floating slab system is another method to prevent moisture wicking and related foundation issues.

In short, 4”-6” offers the ideal balance of strength and economy for small-to-moderate barndominium builds. Evaluate larger footprints on an individual basis to determine if thicker design merits the extra cost. Careful gravel prep, reinforcement and moisture prevention also ensure the slab’s lasting structural stability as an adapted new home.

How Thick Should Your Barndominium Slab Be? (7)

Aaron Scott

Aaron Scott is a freelance writer and researcher that has written hundreds of articles for online companies in the area of construction, design, finance and automotive. He's a Southern boy that enjoys creek fishing, hunting and camping. He's rarely seen without his trusted beagle hound "Scooter"

How Thick Should Your Barndominium Slab Be? (2024)
Top Articles
Latest Posts
Article information

Author: Tish Haag

Last Updated:

Views: 5916

Rating: 4.7 / 5 (67 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Tish Haag

Birthday: 1999-11-18

Address: 30256 Tara Expressway, Kutchburgh, VT 92892-0078

Phone: +4215847628708

Job: Internal Consulting Engineer

Hobby: Roller skating, Roller skating, Kayaking, Flying, Graffiti, Ghost hunting, scrapbook

Introduction: My name is Tish Haag, I am a excited, delightful, curious, beautiful, agreeable, enchanting, fancy person who loves writing and wants to share my knowledge and understanding with you.